Amina Khatun

and 3 more

DEBI PRASAD SAHOO

and 2 more

For catchment-scale streamflow estimation, recently, the preference is shifting towards the use of innovative remote sensing (RS)-based approaches at the remote gauging stations. In this context, this study evaluates the performances of three RS-based models designed with the near-infrared (NIR) bands of Landsat images at the Jenapur outlet of the Brahmani River basin in eastern India. These RS-based models are designed using the spectral behavior of land (C) and water (M) pixels in the NIR region of the electromagnetic spectrum in the presence and absence of water surrounding the streamflow gauging station. Further, the computed pixel ratio (C/M) is used as a parameter for the discharge estimation, in which four years (2009-2013) of Landsat images are used during calibration and three years (2014-2016) of these images are used during validation. Model-I uses the C/M method in which a box-matrix is conceptualized to analyze the optimal location of the land pixel (C0); and subsequently, the time series of C/M is calibrated with the in-situ discharge (Q) time series. The best pixel ratio (C0/M) time series is preprocessed with an exponential smoothing filter to derive the best filtered-pixel ratio (C0/M*) time series, which is used in the regression model to estimate the river discharge. Model-II corresponds to the multi-pixel ratio (MPR) method, where a 3×3 window is used to calculate the average reflectance of both the C and M pixels within the box-matrix, and subsequently, to obtain the best pixel (C0ʹ/Mʹ) ratio as in the case of Model-I to develop the spectral relationship between C0ʹ/Mʹ and Q time series. Model-III uses both the C/M and water width-based function to estimate the streamflow. The performance evaluation of the models is carried out using the Nash-Sutcliffe efficiency, Percentage bias, and Mean absolute error, which reveals that the model performance varies in the order: Model-III > Model-II > Model-I. This proposed RS-based discharge estimation model framework has the potential to be used in many world- rivers with varying cross-sections.

Amina Khatun

and 2 more

Ashutosh Pati

and 1 more

Nowadays, many of the world cities and its peripheral areas are under constant threat of flooding due to high rainfall events. Increased rate of severe flood hazards world-wide have created a demand for understanding the flooding behaviour across various urban and peri-urban catchments. However, simulating the flooding scenarios under limited hydrological data condition is a great challenge for the urban water planners and managers, especially in developing countries. To this, in this study, a combined modelling approach is proposed with the physically based Variable Parameter Muskingum Stage (VPMS) routing model to develop a local rating curve for generating the discharge data from the available stream stage data, which was subsequently used as an input to the Storm Water Management Model (SWMM). The coupled methodology is applied in a typical ungauged urban and peri-urban catchment of eastern India. The proposed SWMM-VPMS model is calibrated for the monsoon (rainy) season of the year 2009, and validated for the monsoon seasons of 2011 and 2014. The performance of the model is satisfactory with the Nash-Sutcliffe efficiency (NSE) estimates of 0.82, 0.89, and 0.89 for the years 2009, 2011, and 2014, respectively. The proposed SWMM-VPMS model can be used for a catchment where the tributary is ungauged while the main river is gauged at a downstream location of the confluence point. This methodology can also be adopted in catchments with missing rating curves. Additionally, the information regarding spatial distribution of channel flow depth at different time can be utilised to have an initial assessment of the flood-vulnerable areas. Keywords: VPMS; SWMM; Urban and peri-urban catchment; Ungauged catchment
Water Balance Components (WBCs), the most fundamental processes of a river basin, are getting disturbed by climate change and land-use alterations in the present scenario. These two factors are the major driving force behind the spatio-temporal variation of the WBCs that creates an alarming concern for fulfilling water demand by different sectors. The popular hydrological model Soil and Water Assessment Tool (SWAT) is applied to the Baitarani River basin (12,095 km2) of eastern India for evaluating the dominance of the above factors on the WBCs deviations at a decadal scale (1980-1989, 1990-1999, and 2000-2009). A quantile regression-based stochastic approach has been used to analyze the uncertainties resulting from different simulations accounting the combined responses of climate change and land-use alterations as well as model parameters. However, such analysis has not been explored more for the present study area. The model performance results reveal that the statistical performance indices (NSE and R2) are within the acceptable limit. The WBCs in terms of evapotranspiration, surface runoff, lateral flow, water yield, soil moisture storage, and deep aquifer recharge has been quantified at a decadal scale from the simulated model outcomes. The result shows that the water yield component is more (680.36 mm) for mid-decade (1990-1999) as compared to other decades, which is favourable to fulfill sectoral water demand. Further, the uncertainty analysis explains that climate change impact plays a vital role in WBCs variation. The developed approach can portray the variability of WBCs of other river basins that are vulnerable to climate change. The outcomes of this study can be used to maintain an appropriate balance between water availability and demand to avoid water scarcity. Keywords: Water balance components; Climate change; Land-use Alterations, Brahmani; Baitarani

Sonam Sandeep Dash

and 2 more

Catchment-scale streamflow assessment in the paddy-dominated catchments using the available hydrological models is highly intricate due to the presence of significant ponding water during the rainy season and irrigation events. While the Soil and Water Assessment Tool (SWAT) and Variable Infiltration Capacity (VIC) model could be some suitable options for this, the model conceptualization, discretization of spatial domain, involved computational time, and these integrated effects on streamflow simulation are yet to be evaluated. Hence, this study evaluates the performances of the semi-distributed hydrologic response unit (HRU) based SWAT-pothole and grid-based VIC model for catchment-scale streamflow simulation; and subsequently, assesses the effect of the spatial domain representation of the catchment on the model computational requirement. The selected study is the 12,014 km2 Kangsabati River basin (KRB) of eastern India that consists of about 46% paddy land use with the tropical monsoon type climate having complex paddy field dynamics. SWAT is set up for the whole KRB using the add-in reservoir module; whereas the VIC model, due to the absence of reservoir module, is set up individually for the upstream river catchment and the downstream reservoir-catchment command. The SWAT setup consisted of 44 and 191 discrete sub-basins and HRUs, respectively. Conversely, the VIC setup resulted in 31 grids with 0.25°0.25° spatial discretization. The model simulation results reveal that the SWAT-pothole approach performed better with the Nash-Sutcliffe Efficiency (NSE) estimate of 0.79 than the standalone VIC model (NSE=0.68). However, the other water balance components, viz. evapotranspiration, baseflow, and percolation are far away from reality in both the models which could be attributed to the non-accountability of irrigation return flow by the SWAT-pothole model. The inferior water balance simulation in VIC could be aggravated due to the absence of crop management module and ignorance of explicit paddy land use class in a VIC grid. These findings highlight the future scope of including more dynamic spatial representation of paddy land use in the SWAT and VIC model domain for their application in other similar world river basins.