Utilizing angular-varied illumination in Fourier Ptychography (FP), the resolution of optical microscopes can be increased and the phase of the sample can also be recovered while maintaining a wide field-of-view. In this work, an FP microscopy imaging setup is demonstrated using a 10X 0.28NA objective lens and a dome-shaped LED array illuminator. By increasing the refractive index of the medium between the sample and light sources using oil filled dome, a synthetic system NA of 0.68 is achieved using only 37 LEDs. The measured resolution of 345 nm at a wavelength of 530 nm closely matches the theoretical prediction. Furthermore, the results of the oil-medium illumination are compared to free-space illumination. The oil immersion on the illumination side effectively enhances the illumination NA as compared to air and reduces the need for far off-axis LEDs. The result is high-resolution FP imaging with relatively fewer LEDs providing both short capture and reconstruction times.

Planar antenna arrays of a balanced structure are of great importance in many applications due to their features including low-profile, wideband and high polarisation purity. However, feeding such antennas adds great complexity in terms of manufacturing and reduces the performance due to production of common mode propagation. A method for feeding such antennas using coplanar waveguide on a thin substrate is proposed. Not only does it terminate the antenna of a balanced structure with a single-ended feed but it also enables impedance transformation. The design was an attempt towards a completely printed front-end that incorporates the antenna elements and their feeding circuits on bendable substrates. The electromagnetic performance has been validated with a dual polarized prototype and its prospect for ultrawideband arrays e.g., 5G sub-6 GHz or square kilometre array, was explored.