this is for holding javascript data
Morgan Deleted File
almost 8 years ago
Commit id: 382ce36cc2186b110c3cbab2db7e5c8e7abfcf68
deletions | additions
diff --git a/Figure_102_Principe_.tex b/Figure_102_Principe_.tex
deleted file mode 100644
index f2eb33c..0000000
--- a/Figure_102_Principe_.tex
+++ /dev/null
...
Figure 10.2~: Principe de mesure d'un réseau de paramètres S multiports
Comme décrit dans la figure~X, \emph{U\textsubscript{j}} est la source
de tension au \emph{j}\textsuperscript{ième} port (usuellement
\emph{U\textsubscript{j}} =1~V) en série avec une impédance interne Z0 et
Ii est le courant résultant au \emph{i}\textsuperscript{ième} port (le
reste des ports étant chargés avec Z0).
{[}1{]} C. L. Holloway, M. S. Sarto, and M. Johansson, ``Analyzing
Carbon-Fiber Composite Materials With Equivalent-Layer Models,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. 47, no. 4, pp. 833--844,
Nov. 2005.
{[}2{]} H. Haase and J. Nitsch, ``High frequency model for the transfer
impedance based on a generalized transmission-line theory,'' in
\emph{2001 IEEE EMC International Symposium. Symposium Record.
International Symposium on Electromagnetic Compatibility (Cat.
No.01CH37161)} , 2001, vol. 2, pp. 1242--1247.
{[}3{]} E. Vance, ``Shielding Effectiveness of Braided-Wire Shields,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. EMC-17, no. 2, pp. 71--77,
May 1975.
{[}4{]} C. Paul, ``Computation of Crosstalk in a Multiconductor
Transmission Line,'' \emph{IEEE Trans. Electromagn. Compat.}, vol.
EMC-23, no. 4, pp. 352--358, Nov. 1981.
{[}5{]} C. R. Paul and B. A. Bowles, ``Symbolic solution of the
multiconductor transmission-line equations for lines containing shielded
wires,'' \emph{IEEE Trans. Electromagn. Compat.}, vol. 33, no. 3, pp.
149--162, 1991.
{[}6{]} S. A. Schelkunoff, ``The Electromagnetic Theory of Coaxial
Transmission Lines and Cylindrical Shields,'' \emph{Bell Syst. Tech.
J.}, vol. 13, no. 4, pp. 532--579, Oct. 1934.
{[}7{]} A. M. and S. F. and K. S. and J. Barenfanger, ``Analysis of
shielding effectiveness of HV cable and connector systems used for
electric vehicles,'' in \emph{Electromagnetic Compatibility (EMC
EUROPE), 2013 International Symposium on}, 2013, pp. 241--246.
{[}8{]} R. Tiedemann, ``Current flow in coaxial braided cable shields,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. 45, no. 3, pp. 531--537,
Aug. 2003.
{[}9{]} M. Tyni, ``The transfer impedance of coaxial cables with braided
outer conductor,'' \emph{Dig. 10th Int. Worclaw Symp. EMC}, pp.
410--419, 1976.
{[}10{]} G. Zhou and L. Gong, ``An improved analytical model for braided
cable shields,'' \emph{IEEE Trans. Electromagn. Compat.}, vol. 32, no.
2, pp. 161--163, May 1990.
{[}11{]} S. Sali, ``An improved model for the transfer impedance
calculations of braided coaxial cables,'' \emph{IEEE Trans. Electromagn.
Compat.}, vol. 33, no. 2, pp. 139--143, May 1991.
{[}12{]} H. S. and J. V. and R. Otin, ``Electromagnetic analysis of
metal braids,'' in \emph{H. Schippers and J. Verpoorte and R. Otin},
2011, pp. 543--548.
{[}13{]} T. Kley, ``Optimized single-braided cable shields,'' \emph{IEEE
Trans. Electromagn. Compat.}, vol. 35, no. 1, pp. 1--9, 1993.
{[}14{]} H. Schippers and J. Verpoorte, ``Hole inductance in braided
cable shields,'' in \emph{2015 IEEE International Symposium on
Electromagnetic Compatibility (EMC)}, 2015, pp. 56--61.
{[}15{]} Wang Xiaoling, Liu Chao, Ding Hao, and Wang Lixin, ``An
improved model for the transfer impedance calculations of braided
coaxial cables,'' in \emph{Proceedings of The 7th International Power
Electronics and Motion Control Conference}, 2012, pp. 1078--1081.
{[}16{]} R. Otin, J. Verpoorte, and H. Schippers, ``Finite Element Model
for the Computation of the Transfer Impedance of Cable Shields,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. 53, no. 4, pp. 950--958,
Nov. 2011.
{[}17{]} K. Kreisch, S. Kubitzek, C. Hofmeister, J. Barenfanger, and M.
Schugt, ``Transfer impedance measurements and simulations on perforated
fully-rigid coaxial cables with the Line Injection and the Triaxial
Method,'' in \emph{2014 International Symposium on Electromagnetic
Compatibility}, 2014, pp. 850--855.
{[}18{]} C. Hofmeister and K. Kreisch and M. Obholz and A. A. T. Anvari
and F. Jenau, ``Experimental investigation of shielding effectiveness of
automotive HV cables after mechanical stress,'' in \emph{Electromagnetic
Compatibility (EMC EUROPE), 2013 International Symposium on}, 2013, pp.
235--240.
{[}19{]} L. Jung and J. Luiken ter Haseborg, ``Improved triaxial set-ups
for the measurement of complex transfer impedances and admittances of
shielded multiconductor cables inside cable bundles,'' in \emph{IEEE
International Symposium on Electromagnetic Compatibility. Symposium
Record (Cat. No.00CH37016)}, vol. 1, pp. 41--44.
{[}20{]} L. Jung and J. Luiken ter Haseborg, ``Characterization of
shield inhomogeneities of multiconductor cables by evaluation of
measured transfer impedances and admittances,'' in \emph{1999 IEEE
International Symposium on Electromagnetic Compatability. Symposium
Record (Cat. No.99CH36261)}, vol. 2, pp. 571--576.
{[}21{]} L. Jung and J. Luiken ter Haseborg, ``Evaluation of measured
complex transfer impedances and transfer admittances for the
characterization of shield inhomogeneities of multiconductor cables,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. 41, no. 4, pp. 460--468,
1999.
{[}22{]} B. Vanlandschoot and L. Martens, ``New method for measuring
transfer impedance and transfer admittance of shields using a triaxial
cell,'' \emph{IEEE Trans. Electromagn. Compat.}, vol. 39, no. 2, pp.
180--185, May 1997.
{[}23{]} R. Tiedemann and K.-H. Gonschorek, ``Simple method for the
determination of the complex cable transfer impedance,'' in \emph{1998
IEEE EMC Symposium. International Symposium on Electromagnetic
Compatibility. Symposium Record (Cat. No.98CH36253)}, vol. 1, pp.
100--105.
{[}24{]} T. Kley, ``Measuring the coupling parameters of shielded
cables,'' \emph{IEEE Trans. Electromagn. Compat.}, vol. 35, no. 1, pp.
10--20, 1993.
{[}25{]} J. Hohloch, S. Tenbohlen, W. Kohler, M. Aidam, and A. Ludwig,
``Measurement of transfer impedances of components for automotive
high-voltage power networks,'' in \emph{International Symposium on
Electromagnetic Compatibility - EMC EUROPE}, 2012, no. Figure 1, pp.
1--6.
{[}26{]} S. Caniggia and F. Maradei, ``SPICE-Like Models for the
Analysis of the Conducted and Radiated Immunity of Shielded Cables,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. 46, no. 4, pp. 606--616,
Nov. 2004.
{[}27{]} H. Xie, J. Wang, R. Fan, and Y. Liu, ``SPICE Models to Analyze
Radiated and Conducted Susceptibilities of Shielded Coaxial Cables,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. 52, no. 1, pp. 215--222,
Feb. 2010.
{[}28{]} A. Orlandi, ``Circuit model for bulk current injection test on
shielded coaxial cables,'' \emph{IEEE Trans. Electromagn. Compat.}, vol.
45, no. 4, pp. 602--615, Nov. 2003.
{[}29{]} F. Bogdanov, R. Jobava, S. Frei, A. Gheonjian, E. Yavolovskaya,
B. Huneke, and C. Lippert, ``Enhanced MoM scheme with incorporation of
general N-port networks in application to automotive EMC problems,'' in
\emph{2007 18th International Zurich Symposium on Electromagnetic
Compatibility} , 2007, pp. 341--344.
{[}30{]} S. Helmers, H.-F. Harms, and H.-K. Gonschorek, ``Analyzing
electromagnetic pulse coupling by combining TLT, MoM, and GTD/UTD,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. 41, no. 4, pp. 431--435,
1999.
{[}31{]} H.-D. Bruns and H. Singer, ``Computation of interference in
cables close to metal surfaces,'' in \emph{1998 IEEE EMC Symposium.
International Symposium on Electromagnetic Compatibility. Symposium
Record (Cat. No.98CH36253)}, vol. 2, pp. 981--986.
{[}32{]} F. B. M. van Horck, A. P. J. van Deursen, P. C. T. van der
Laan, P. R. Bruins, and B. L. F. Paagmans, ``A rapid method for
measuring the transfer impedance of connectors,'' \emph{IEEE Trans.
Electromagn. Compat.}, vol. 40, no. 3, pp. 193--200, 1998.
{[}33{]} Xiaofeng Pan, T. Rinkleff, and R. Vick, ``RF-Properties of
Single Shielded Power Cable Connectors,'' \emph{IEEE Trans. Electromagn.
Compat.}, vol. 55, no. 6, pp. 1338--1341, Dec. 2013.
{[}34{]} C. Paul, ``Effect of Pigtails on Crosstalk to Braided-Shield
Cables,'' \emph{IEEE Trans. Electromagn. Compat.}, vol. EMC-22, no. 3,
pp. 161--172, Aug. 1980.
{[}35{]} H. A. N. Hejase, A. T. Adams, R. F. Harrington, and T. K.
Sarkar, ``Shielding effectiveness of `pigtail' connections,'' \emph{IEEE
Trans. Electromagn. Compat.}, vol. 31, no. 1, pp. 63--68, Feb. 1989.
{[}36{]} H. A. N. Hejase, ``Radiation properties of a pigtail-terminated
coaxial transmission line,'' \emph{IEEE Trans. Electromagn. Compat.},
vol. 34, no. 1, pp. 23--27, 1992.
{[}37{]} H. A. N. Hejase, A. T. Adams, and R. F. Harrington, ``A
quasi-static technique for evaluation of pigtail connections,''
\emph{IEEE Trans. Electromagn. Compat.} , vol. 31, no. 2, pp. 180--183,
May 1989.
{[}38{]} O. Oz, C. Guerin, E. Vialardi, and S. Benhassine, ``Analysis of
grounding performances of car body by means of FEM shell elements,'' in
\emph{International Symposium on Electromagnetic Compatibility - EMC
EUROPE} , 2012, vol. 2, pp. 1--6.
{[}39{]} F. S. 7.0.2, ``EM Software \& Systems-S.A., Stellenbosch, South
Africa, http://www.feko.info.'' .
{[}40{]} K. Feldhues, M. Diebig, and S. Frei, ``Analysis of the low
frequency shielding behavior of high voltage cables in electric
vehicles,'' in \emph{2014 International Symposium on Electromagnetic
Compatibility}, 2014, no. 3, pp. 408--413.
{[}41{]} P. Besnier, S. Chabane, and M. Klingler, ``Some limiting
aspects of transmission line theory and possible improvements,''
\emph{IEEE Electromagn. Compat. Mag.} , vol. 3, no. 2, pp. 66--75, 2014.
{[}42{]} K. Kurokawa, ``Power Waves and the Scattering Matrix,''
\emph{IEEE Trans. Microw. Theory Tech.} , vol. 13, no. 2, pp. 194--202,
Mar. 1965.