this is for holding javascript data
Amy Kimball edited untitled.tex
almost 8 years ago
Commit id: d147f93ab7a2690d7bb3fab4c727e87349b515b2
deletions | additions
diff --git a/untitled.tex b/untitled.tex
index 624bd10..33db98f 100644
--- a/untitled.tex
+++ b/untitled.tex
...
\end{itemize}
\item 320 to 330d: No question best calibrator is J2136+0041, ~3.5 Jy at L band and 10Jy in C band, inside tile and furthest corner distance is 6.2d. May be a good choice for this entire 20d-wide sub-tile. Furthest corner distance for 310-330d sub-tile is 14.3d. So bright: good polarization calibrator?
\end{itemize}
\textbf{\textit{Stripe 82-B: 330 to 360/0d, -1.33 to 1.33d}}
\begin{itemize}
\item 330 to 340d: obvious/only choice is J2212+0152, P code (TCAL-confirmed), 1Jy in C band 2.7Jy in L band, furthest corner distance 7.6d
\item 340 to 350d:
\begin{itemize}
\item (S-code J2323-0317, ~0.8Jy, furthest corner distance 11.8d, declination too low...)
\item S-code J2337-0230, ~0.7Jy, furthest corner distance 15d
\item J2247+0000 as used by Steve/Kunal but need further info to see if suitable, furthest corner distance 8.4d
\item another option is to use J2212+0512 (for whole 330 to 350d sub-tile); furthest corner-distance is 17.1d.
\end{itemize}
\item 350 to 360/0d:
\begin{itemize}
\item S code J2337-0230, ~0.67Jy, furthest corner distance 6.7d
\item S code J2323-0317, ~0.8Jy, furthest corner distance 10.2d
\item P code is J0016-0015, ~0.7Jy, furthest corner distance 14.1d (TCAL-confirmed)
\item P code J0022+0014, ~1.5Jy, furthest corner distance 15.7d (TCAL-confirmed)
\end{itemize}
\end{itemize}