this is for holding javascript data
Amy Kimball edited textbf_textit_Stripe_82_B__.tex
almost 8 years ago
Commit id: 422d910271c68557900fafe9d3251fd62c8ddce7
deletions | additions
diff --git a/textbf_textit_Stripe_82_B__.tex b/textbf_textit_Stripe_82_B__.tex
index aea95ca..09a52ac 100644
--- a/textbf_textit_Stripe_82_B__.tex
+++ b/textbf_textit_Stripe_82_B__.tex
...
Use 3C286 as flux cal. Tiles/cals above 30d starting at \sim18:45. Guess LST start range 18:45-23:00.
\begin{itemize}
\item 330 to 340d: obvious/only choice is \textbf{J2212+0152}, P code (TCAL-confirmed), 1Jy in C band 2.7Jy in L band, furthest corner distance
7.6d 7.6d. Start rows at \textbf{west} edge.
\item 340 to 350d:
\begin{itemize}
\item (S-code J2323-0317, ~0.8Jy, furthest corner distance 11.8d, declination too low...)
\item S-code \textbf{J2337-0230}, ~0.7Jy, furthest corner distance 15d
\item \textbf{J2247+0000} as used by Steve/Kunal but need further info to see if suitable, furthest corner distance
8.4d 8.4d. Start rows at \textbf{west} edge.
\item another option is to use J2212+0512 (for whole 330 to 350d sub-tile); furthest corner-distance is 17.1d.
\end{itemize}
\item 350 to 360/0d:
\begin{itemize}
\item S code \textbf{J2337-0230}, ~0.67Jy, furthest corner distance
6.7d 6.7d. Start rows at \textbf{west} edge, unless using this calibrator for all of 340 to 360d, then start at east edge.
\item S code J2323-0317, ~0.8Jy, furthest corner distance 10.2d
\item P code is J0016-0015, ~0.7Jy, furthest corner distance 14.1d (TCAL-confirmed)
\item P code J0022+0014, ~1.5Jy, furthest corner distance 15.7d (TCAL-confirmed)