K.-Michael Aye edited ground_calib.tex  over 8 years ago

Commit id: 81e812f570e05c6cbf68147e8afacf6d8c5e15af

deletions | additions      

       

The LakeShore sensors were read out with a LakeShore 330 temperature controller, which had been recently calibrated.  The controller was set to use the standard LakeShore Curve 10 for all the sensors.  Thus, the raw silicon diode sensor temperatures need to be translated from Curve 10 to the specific calibration curve for each sensor.  \begin{tabular}{lll}  Parameter & Value & Unit\\  \hline  Detector Nominal IFOV Cross Track & 3.58 & mrad \\  Detector Nominal IFOV In Track & 6.15 & mrad \\  Nominal Telescope Aperture Diameter & 4 & cm\\  Reduction in Aperture Area & 6 & \% \\  Effective F number & 1.87 & \\  Etendue & 2.6E-04 & cm$^2$sr \\  Detector Dimension Cross Track & 0.024 & cm \\  Detector Dimension In Track & 0.048 & cm \\  Detector $\mathrm{D^*}$ & 8.0E+08 & $\frac{cmHz^{1/2}}{W}$ \\  Signal Integration Time & 0.128 & s \\  Detector Noise-Equivalent Power (NEP) & 8.4E-11 & \\  \hline  \end{tabular}  \caption{\label{tab:parameters_shared} Parameters shared by all channels.}