deletions | additions       diff --git a/Appendix.tex b/Appendix.tex  index 79fd79d..8302710 100644  --- a/Appendix.tex  +++ b/Appendix.tex 
...
\section*{Appendix}  \subsection{Analysis of Data}  For each measurement measurement,  data was recorded taken  from the Oscilloscope into oscilloscope and stored in  raw csv text (csv)  files labelled with the varied parameter and scintillator crystal used in a A vs B fashion. Each measurement produced 7 datafiles, corresponding to different recorded information from the programmed oscilloscope. These are :  \begin{enumerate}  \item Maximum energy per event of the left scintillator detector  \item Maximum energy per event of the right scintillator detector  \item The relative arrival time between coincidence events  \item (Not used) Width of left NINO signal  \item (Not used) Width of right NINO signal  \item (Not used)  \item The number of events per period in the left scintillator detector  \item The number of events per period in the right scintillator detector  \end{enumerate}  Where files 1,2 1 and 2  are the maximum energy per event, files 7,8 are the events per period and file 3 is the relative arrival time. The remaining two files correspond to the widths of the NINO signals. These are not used. The code To reach the processed data  attached to this paper performs research paper,  the following tasks : were performed upon the raw data.  \begin{enumerate}  \item Load grouped data into memory