deletions | additions       diff --git a/textit_Johnson_Noise_To_perform__.tex b/textit_Johnson_Noise_To_perform__.tex  index dd16a0b..e38699c 100644  --- a/textit_Johnson_Noise_To_perform__.tex  +++ b/textit_Johnson_Noise_To_perform__.tex 
...
\textit{Johnson Noise}  To perform the Johnson Noise Experiment, we used the Noise Fundamentals devices and two digital multi-meters. Our settings for the Noise Fundamentals devices were as follows: $10K$ ohm resistor, we used a Gain of $1000$ for all values, we used a room temperature of $295$ degrees Kelvin, and we varied the high and low pass filters' frequency for each data set in order to vary the bandwidth. In Table 1, you can see how we varied the low pass filter (f2) and the high pass filter (f1) in order to change the bandwidth. The values are taken from the DMM multi-meter  after going through the filters, gain, and multiplier. All of the values are in mV; we took $36$ sets of data points.