deletions | additions       diff --git a/subsubsection_Johnson_noise_in_1k__1.tex b/subsubsection_Johnson_noise_in_1k__1.tex  index 5e922d7..3e3cd6f 100644  --- a/subsubsection_Johnson_noise_in_1k__1.tex  +++ b/subsubsection_Johnson_noise_in_1k__1.tex 
...
\subsubsection{Johnson noise in $1k \Omega$ Resistor}  Our settings for the Noise Fundamentals devices were as follows: $1k \Omega$ resistor, we used a Gain 1 ($G1$) of $\times600$ for all values that comes directly from the Noise Fundamental device, a Gain 2 ($G2$) of $\times1000$ for all values, we used a room temperature of $296$ degrees Kelvin, and we varied the high and low pass filters' frequency for each data set in order to vary the bandwidth. In Table \ref{table:Johnson1}, you can see how we varied the low pass filter ($f2$) and the high pass filter ($f1$) in order to change the bandwidth. The values are taken from the multi-meter after going through the filters, gain, and multiplier - passing through the $A \times A$ multiplier and then being divided by 10 Volts. All of the values are in mV; we took $36$ sets of data points. You can see all these values in TABLE  \ref{table:Johnson2}. The values in \ref{table:Johnson2} are explained by the following equation: