this is for holding javascript data
Lucy Liang added subsubsection_Instrumental_Noise_1_Omega__1.tex
over 8 years ago
Commit id: 8b5909afc0fcdeabd3adbe533ec0eab2f9014a86
deletions | additions
diff --git a/subsubsection_Instrumental_Noise_1_Omega__1.tex b/subsubsection_Instrumental_Noise_1_Omega__1.tex
new file mode 100644
index 0000000..2af64be
--- /dev/null
+++ b/subsubsection_Instrumental_Noise_1_Omega__1.tex
...
\subsubsection{Instrumental Noise: $1 \Omega$ Resistor}
Our settings for the Noise Fundamentals devices were as follows: $1 \Omega$ resistor, we used a Gain 1 ($G1$) of $\times600$ for all values that comes directly from the Noise Fundamental device, a Gain 2 ($G2$) of $\times1000$ for all values, we used a room temperature of $296$ degrees Kelvin, and we varied the high and low pass filters' frequency for each data set in order to vary the bandwidth. In Table.~\ref{table:Johnson1}, you can see how we varied the low pass filter ($f2$) and the high pass filter ($f1$) in order to change the bandwidth. The values are taken from the multi-meter after going through the filters, gain, and multiplier. All of the values are in mV; we took $36$ sets of data points. You can see all these values in Table \ref{table:Johnson3}.
Average error: 0.003
