deletions | additions       diff --git a/figures/IMG_1/caption.tex b/figures/IMG_1/caption.tex  index 9fed1f0..53f3f28 100644  --- a/figures/IMG_1/caption.tex  +++ b/figures/IMG_1/caption.tex 
...
\label{fig:JohnsonSetUp} \lable{fig:JohnsonSetUp}  From left to right: \textbf{1)} Low Level Electronics (LLE). This instrument provides the $\textrm{R}_\textrm{in}$ (the $10\textrm{k}\Omega$ and $1\textrm{k}\Omega$ resistors in this experiment) and an initial gain, G1, when using $\textrm{R}_\textrm{f}=1\textrm{k}\Omega$ that amplifies the signal to a big enough voltage for the High Level Electronics (HLE). \textbf{2)} High Level Electronics. The high pass and low pass filters of this instrument provides a bandwidth frequency ($\Delta f$) which will eliminate all parts of the incoming signal that are out of that frequency range. Then, the filtered signal is again amplified by G2. Finally, the signal goes through a multiplier. \textbf{3)} Only the upper right DMM was used in this experiment, with which the final signal, $\textrm{V}_\textrm{mult}$ was read.