this is for holding javascript data
KEUNTAE added file apstemplate.tex
over 8 years ago
Commit id: 97413a04e31aded5a401b055427dac60fe528aa8
deletions | additions
diff --git a/apstemplate.tex b/apstemplate.tex
new file mode 100644
index 0000000..a258e43
--- /dev/null
+++ b/apstemplate.tex
...
%% ****** Start of file apstemplate.tex ****** %
%%
%%
%% This file is part of the APS files in the REVTeX 4 distribution.
%% Version 4.1r of REVTeX, August 2010
%%
%%
%% Copyright (c) 2001, 2009, 2010 The American Physical Society.
%%
%% See the REVTeX 4 README file for restrictions and more information.
%%
%
% This is a template for producing manuscripts for use with REVTEX 4.0
% Copy this file to another name and then work on that file.
% That way, you always have this original template file to use.
%
% Group addresses by affiliation; use superscriptaddress for long
% author lists, or if there are many overlapping affiliations.
% For Phys. Rev. appearance, change preprint to twocolumn.
% Choose pra, prb, prc, prd, pre, prl, prstab, prstper, or rmp for journal
% Add 'draft' option to mark overfull boxes with black boxes
% Add 'showpacs' option to make PACS codes appear
% Add 'showkeys' option to make keywords appear
\documentclass[aps,prl,preprint,groupedaddress]{revtex4-1}
%\documentclass[aps,prl,preprint,superscriptaddress]{revtex4-1}
%\documentclass[aps,prl,reprint,groupedaddress]{revtex4-1}
% You should use BibTeX and apsrev.bst for references
% Choosing a journal automatically selects the correct APS
% BibTeX style file (bst file), so only uncomment the line
% below if necessary.
%\bibliographystyle{apsrev4-1}
\begin{document}
% Use the \preprint command to place your local institutional report
% number in the upper righthand corner of the title page in preprint mode.
% Multiple \preprint commands are allowed.
% Use the 'preprintnumbers' class option to override journal defaults
% to display numbers if necessary
%\preprint{}
%Title of paper
\title{}
% repeat the \author .. \affiliation etc. as needed
% \email, \thanks, \homepage, \altaffiliation all apply to the current
% author. Explanatory text should go in the []'s, actual e-mail
% address or url should go in the {}'s for \email and \homepage.
% Please use the appropriate macro foreach each type of information
% \affiliation command applies to all authors since the last
% \affiliation command. The \affiliation command should follow the
% other information
% \affiliation can be followed by \email, \homepage, \thanks as well.
\author{}
%\email[]{Your e-mail address}
%\homepage[]{Your web page}
%\thanks{}
%\altaffiliation{}
\affiliation{}
%Collaboration name if desired (requires use of superscriptaddress
%option in \documentclass). \noaffiliation is required (may also be
%used with the \author command).
%\collaboration can be followed by \email, \homepage, \thanks as well.
%\collaboration{}
%\noaffiliation
\date{\today}
\begin{abstract}
% insert abstract here
\end{abstract}
% insert suggested PACS numbers in braces on next line
\pacs{}
% insert suggested keywords - APS authors don't need to do this
%\keywords{}
%\maketitle must follow title, authors, abstract, \pacs, and \keywords
\maketitle
% body of paper here - Use proper section commands
% References should be done using the \cite, \ref, and \label commands
\section{}
% Put \label in argument of \section for cross-referencing
%\section{\label{}}
\subsection{}
\subsubsection{}
% If in two-column mode, this environment will change to single-column
% format so that long equations can be displayed. Use
% sparingly.
%\begin{widetext}
% put long equation here
%\end{widetext}
% figures should be put into the text as floats.
% Use the graphics or graphicx packages (distributed with LaTeX2e)
% and the \includegraphics macro defined in those packages.
% See the LaTeX Graphics Companion by Michel Goosens, Sebastian Rahtz,
% and Frank Mittelbach for instance.
%
% Here is an example of the general form of a figure:
% Fill in the caption in the braces of the \caption{} command. Put the label
% that you will use with \ref{} command in the braces of the \label{} command.
% Use the figure* environment if the figure should span across the
% entire page. There is no need to do explicit centering.
% \begin{figure}
% \includegraphics{}%
% \caption{\label{}}
% \end{figure}
% Surround figure environment with turnpage environment for landscape
% figure
% \begin{turnpage}
% \begin{figure}
% \includegraphics{}%
% \caption{\label{}}
% \end{figure}
% \end{turnpage}
% tables should appear as floats within the text
%
% Here is an example of the general form of a table:
% Fill in the caption in the braces of the \caption{} command. Put the label
% that you will use with \ref{} command in the braces of the \label{} command.
% Insert the column specifiers (l, r, c, d, etc.) in the empty braces of the
% \begin{tabular}{} command.
% The ruledtabular enviroment adds doubled rules to table and sets a
% reasonable default table settings.
% Use the table* environment to get a full-width table in two-column
% Add \usepackage{longtable} and the longtable (or longtable*}
% environment for nicely formatted long tables. Or use the the [H]
% placement option to break a long table (with less control than
% in longtable).
% \begin{table}%[H] add [H] placement to break table across pages
% \caption{\label{}}
% \begin{ruledtabular}
% \begin{tabular}{}
% Lines of table here ending with \\
% \end{tabular}
% \end{ruledtabular}
% \end{table}
% Surround table environment with turnpage environment for landscape
% table
% \begin{turnpage}
% \begin{table}
% \caption{\label{}}
% \begin{ruledtabular}
% \begin{tabular}{}
% \end{tabular}
% \end{ruledtabular}
% \end{table}
% \end{turnpage}
% Specify following sections are appendices. Use \appendix* if there
% only one appendix.
%\appendix
%\section{}
% If you have acknowledgments, this puts in the proper section head.
%\begin{acknowledgments}
% put your acknowledgments here.
%\end{acknowledgments}
% Create the reference section using BibTeX:
\bibliography{basename of .bib file}
\end{document}
%
% ****** End of file apstemplate.tex ******