deletions | additions       diff --git a/Completeness.tex b/Completeness.tex  index 29dea8f..4ed638f 100644  --- a/Completeness.tex  +++ b/Completeness.tex 
...
\section{Adherence to specifications}  Indicate which specifications promised in the initial proposal 5.1 Capacitive Touch Controller  Set boundaries on circular touch phidget to allow 8 ways of movement  Allow circular touch phidget to smoothly switch between movement directions  Allow circular touch phidget to press more than one key at a time  Ensure only physical touched  are done recognised  and which are not acted upon by the phidget  Ensure that no electrical inteference affects the phidget whilst in operation  When circular touch is being operated, ensure that no other device can be used  5.2 Slider for Zoom Control  Slider must be able to control zoom in  and why (this zoom out when a certain threshhold is reached  When slider is inactive, ensure other devices can be used  When slider  is active, ensure no other devices can be used  Ensure that when sllider goes outside the trigger threshold, the keys for zooming will be released  5.3 Phidget Screen for Feedback  The screen will display helpful information to the user based on usage context (E.g. RFID information when a tag has been scanned)  Upon program startup, the screen will display a short introduction to the user  5.4 Joystick Control for Panning & Turning  The Joystick will action a command based on a certain threshold on either th X or Y axis  The joystick will be capable of rotating the view on the software by triggering a threshold on the X axis  The joystick can pan up and down on the vertical axis by triggering a threshold on the Y axis item When the joystick is in use, ensure no other device can be activated at the same time.  5.5 RFID Tags for quick navigation and location storage  The RFID tag should be recognised by the RFID scanner in a very short time  The RFID tag should automatically display the saved location to the phidget screen  The RFID tag should automatically navigate to the saved location in Google Earth  5.6 RFID Tag reprogramming  RFID tags will store their locations in software based off their unique hardware ID  To reprogram a tag, a button must be pressed which will switch  our google doc) program to "write mode"  When in write mode, the screen will display a message to ensure the user is aware of the mode  When in write mode, the next tag to be scanned will save the location of the current view on Google Earth