this is for holding javascript data
Matt McCarthy edited Completeness.tex
about 10 years ago
Commit id: 2c4b0666b9bce39bcc0a5c904b750c95bc42728a
deletions | additions
diff --git a/Completeness.tex b/Completeness.tex
index deeb11b..546a4ff 100644
--- a/Completeness.tex
+++ b/Completeness.tex
...
\subsection{Phidget Screen for Feedback}
When a user scans an RFID tag, the screen displays the location stored in the tag. The screen is also used to inform the user when the RFID is waiting to program a tag (after the pressure sensor has been pressed).
-----Upon Upon program startup, the screen will display a short introduction to the user
\subsection{Joystick Control for Panning \& Turning}
All specifications are met. The joystick feeds x and y values to the system, which emulates (ctrl +) arrow key presses based on weather the x and y values are above or below certain thresholds. The x axis is mapped to the left and right arrow keys which cause the camera to rotate. The y axis maps to up and down arrow keys, causing the camera to pan up and down.
When key presses are activated by the joystick, its use becomes exclusive, and no other navigation input can be used.
\subsection{RFID Tags for quick navigation and location storage}
\begin{itemize}
\item The All specifications are met. RFID
tag should be recognised by tags are detected instantly, with immediate nagvigation to the
RFID scanner in a very short time
\item stored tag. The
RFID tag should automatically display the saved location
to appears on the phidget
screen
\item The RFID tag should automatically navigate to the saved location in Google Earth
\end{itemize} screen.
\subsection{RFID Tag reprogramming}
\begin{itemize}
\item All specifications have been met. RFID
tags will store their locations in software based off their unique hardware ID
\item To reprogram a tag, a button must be pressed which will switch our program to "write mode"
\item When tag IDs are stored in
write mode, the
screen will display system, and location values are stored against each tag. The pressure sensor activates tag reprogramming and a message
to ensure the user is aware of appears on the
mode
\item When in write mode, screen. The reprogramming state ends with the next
RFID tag to be
scanned will save scanned, the
location ID of
which is mapped to the current
view on location within Google
Earth
\end{itemize} Earth.