deletions | additions       diff --git a/untitled.tex b/untitled.tex  index b19efb3..17b821c 100644  --- a/untitled.tex  +++ b/untitled.tex 
...
\section{Generating a new dataset}  At the present stage some inconsistencies were discovered in the reported timing uncertainties as listed in Table 1 in Potter et al. (2011). For example the timing uncertainty reported by \cite{Warren_1995} is 0.000023 days, while Potter et al. (2011) reports 0.00003 and 0.00004 days. Furthermore, after scrutinizing the literature we found that several timing measurements were omitted in Potter et al. (2011). We tested for the possibility that Potter et al. (2011) adopts timing uncertainties from the spread of data around a best-fit linear regression. However, that seems not the case: As a test, we used the five timing measurements from \cite{Beuermann1988} as listed in Table 1 in Potter et al. (2011). We fitted a linear straight line using CURVEFIT as implemented in IDL and found a scatter of 0.00004 to 0.00005 days depending on the metric used to measure scatter around the best-fit. The quoted uncertainties in Potter et al. (2011) are smaller by at least a factor of two. We conclude that Potter et al. (2011) must be in error when quoting timing uncertainties in their Table 1. Similar mistakes when quoting timing uncertainties apply to data listed in \cite{Ramsay1994}. Furthermore, after scrutinizing the literature for timing measurements of UZ For we found several timing measurements that were omitted in Potter et al. (2011). For example six eclipse timings were reported by \cite{BaileyCropper_1991} with a uniform uncertainty of 0.00006 days. However, Potter et al. (2011) only reports three of the six timings. A total of five new timings were reported by \cite{Ramsay1994} but only one were listed in Potter et al. (2011).  In this research we advocate! the th/e  use of all timing measurements that have been obtained with reasonable accuracy. We have therefore recompiled all available timing measurements from the litertature. We list them in Table \ref{NewTimingData}. \begin{table}   \begin{tabular}{ c c c c c c }