Jenna M. Lang edited Methods.md  over 9 years ago

Commit id: 1e7bfbe6ca3d542f89383ab60498ef263f81b992

deletions | additions      

       

#Methods  ## Swabbing instructions:  1. Setup Node-2 Camcorder to capture NanoRacks surface swab Ops throughout the US LAB.   2. Retrieve a clean NanoRacks Swab Kit.  Move to ISS location listed on NanoRacks Swab Kit label.   3. Remove cotton swab from NanoRacks Swab Kit, being careful not to touch the cotton swab tip to avoid contamination.   4. Rub cotton swab vigorously against designated surface. Spin and turn the swab to ensure maximum sample collection.   NOTE:   An additional large Ziplock Bag is provided (stowed inside the same bag as the NanoRacks Swab Kits) to use per crew preference to separate the used NanoRacks Swab Kits from the clean (unused) NanoRacks Swab Kits for crew efficiency during sampling.   5. Return cotton swab to NanoRacks Swab Kit and press to close (squeeze excess air out of bag before sealing, Figure 1).   Circle number of location swabbed and label with GMT (dd/hh:mm, Figure 1).   If swab is contaminated by touching a surface other than the designated location on the label,   Label NanoRacks Swab Kit with a large, "X " and move on to the next location. Notify POIC of NanoRacks Swab Kit S/N that was contaminated   6. Repeat step 2 to step 6 for all 15 locations listed on the NanoRacks Swab Kit label (or reference table below).  ## Surfaces swabbed:  Astronauts were instructed to swab 15 surfaces on the International Space Station.        Binary files /dev/null and b/figures/Mod27SwabOps/Mod27SwabOps.pdf differ          

Replace this text with your caption           

height = 700\nwidth = 500