A property of interest is the time between SL pulses. Figure 5 shows how the time between the two pulses were found by identifying two peaks with their corresponding time and subtracting the two values. The value obtained for the time between pulses was \(3.069×10^{-5} \pm 0.01\) seconds, with inherit error in placing the lines at the peak. Also the width of a pulse can be found in the same way and the graph of a zoomed in pulse is shown in figure 6. The value obtained for the width of this pulse was \(1.925*10^{-6} \pm 0.04\) seconds, again with error coming from placing the markers where I believed the start and end of this pulse was.