this is for holding javascript data
Pol Grasland-Mongrain edited The_sample_was_then.tex
over 8 years ago
Commit id: 537a957fa230bc9d8d7acd8f58787c0998af93ef
deletions | additions
diff --git a/The_sample_was_then.tex b/The_sample_was_then.tex
index e7a7c9b..987dcf4 100644
--- a/The_sample_was_then.tex
+++ b/The_sample_was_then.tex
...
The sample was then replaced by a similar phantom except that cellulose particles were used instead of graphite particles: thus, the phantom presented a weak optical absorption but a comparable speckle pattern. A black disk of variable diameter was painted on a surface of the phantom at the laser beam impact location, to control the absorption area. The amplitude of the induced shear waves versus black disk diameter in the second phantom is illustrated in Fig.
\ref{Figure4}-(B). \ref{Figure3}-(B). We observe a linear relationship between shear wave amplitude and black disk diameter, with a correlation coefficient of 0.9281. In both series of experiments (20 plus 23 measurements), we measured shear wave frequency of 500 $\pm$ 100 Hz.
The potential application of these results on a biological tissue was finally studied. The phantom was replaced by a chicken breast sample bought in the local grocery. Due to the absence of absorbing material like melanin or haemoglobin, the laser was diffused in a large area with a very small increase of temperature and could not induce elastic waves. Accordingly, a 5 mm diameter black disk was painted on the surface of the sample at the laser beam incident location.
...