deletions | additions       diff --git a/res_fitting.md b/res_fitting.md  index 8a07924..2a8fec7 100644  --- a/res_fitting.md  +++ b/res_fitting.md 
...
Because it is not know which part of the signal is the event and which is the baseline the first fit also has to estimate the baseline properties.  Signal in the candidate region is fitted with an extended fit function (Figure \ref{fig:fig1}) that also depends on relaxation baseline \(B\) and baseline offset \(C\). The \(C\) parameter allows for the possibility of an elevated background before the release event.   After paramater optimization with the extended fit function the same signal is fitted with a line. For both models the corrected Akaike Information Criterion (AICc \cite{Burnham_2004}) is calculated and the region is accepted only if the AICc for the fit function is less than the AICc for the line. This ensures that the goodness of the fit obtained with the fit function justifies the use of a more complicated model.  In order to reconstruct the entire image with all the pixels it is also necessary to know the location of the pixels. The parameter vector \(\mathbf{p}_i\) is extended with the coordinates of pixel *i*:  \[  \mathbf{r}_i = \left[\mathbf{p}_i,x_i,y_i\right]  =\left[A_i, d_i ,\tau_{d,i},\tau_{r,i},\mu_i,x_i,y_i\right] =  \left[\mathbf{p}^s_{i}, \mathbf{p}^p_{i}\right]  \]  , where \(\mathbf{p}^s=\left[A,d,\tau{d},\tau_{r}\right]\) is the shape paramater vector and \(\mathbf{p}^p=\left[\mu,x,y\right]\) is the position parameter vector.   All *k* events detected in pixel *i* are represented by vectors   \(\mathbf{p}^s_{i,k}\) and \(\mathbf{p}^p_{i,k}\). These vectors can be stacked to creat an event matrix for pixel *i*:  \[  E_i =   \left(  \begin{array}{l l}  \mathbf{p}^s_{i,0}&\mathbf{p}^p_{i,k}\\\\  \mathbf{p}^s_{i,1}&\mathbf{p}^p_{i,k}\\\\  \ldots\\\\  \mathbf{p}^s_{i,k}&\mathbf{p}^p_{i,k}  \end{array}  \right)  =  \left(  \begin{array}{l l}  E_i^s & E_i^p  \end{array}  \right)  \]  The event matrix for the entire image is obtained by stacking all pixel event matrices:  \[  E=\left(  \begin{array}{l}  E_0\\\\  E_1\\\\  \vdots\\\\  E_i  \end{array}  \right)  =\left(  \begin{array}{l l}  E_0^s& E_0^p\\\\  E_1^s& E_1^p\\\\  \vdots&\vdots\\\\  E_i^s& E_i^p  \end{array}  \right)  =\left(  \begin{array}{l l}  E^s & E^p  \end{array}  \right)  \]  , where \(E^s\) and \(E^p\) are shape and position submatrices, respectively, containing event shape and position parameters for all events from all pixels and making up the entire image event matrix \(E\). The separation of shape and position parameters for events is necessary in the next clustering step.