deletions | additions       diff --git a/untitled.tex b/untitled.tex  index e97aa0d..abad01e 100644  --- a/untitled.tex  +++ b/untitled.tex 
...
\section{Performance Objectives}  This section aims to include all the array performance objectives that might be influenced by design choices.  \subsection{Minimize Brightness Sensitivity Limit}  It is often instructive to express the system temperature in terms of the System Equivalent Flux Density, $SEFD$, defined as the flux density of a source that would deliver the same amount of power (see \cite{sensitivity2}):   \begin{equation}\label{eq:system_equivalent_flux_density}  SEFD = {\frac{T_{sys}}{\frac{\eta_a A}{2k_B}}}  \end{equation}  where $T_{sys}$ is the system temperature including contributions from receiver noise, feed losses, spillover, atmospheric emission, galactic background and cosmic background, $k_B = 1.380 \times 10^{-23}$ Joule $K^{-1}$ is the Boltzmann constant, $A$ is the antenna collecting area (thus we could also write $\pi \cdot D^2$), and $\eta_a$ is the antenna efficiency with $\eta_a = \eta_{\text{surface efficiency}} \cdot \eta_{\text{aperture blockage}} \cdot \eta_{\text{feed spillover efficiency}} \cdot \eta_{\text{illumination taper efficiency}}$ (see \cite{antenna}).  If we assume each aperture has the same $SEFD$, observes the same bandwidth $\Delta\nu$, during the same correlator accumulation time $\tau_{acc}$, then the weak-source limit in the sensitivity of a synthesis image of a single polarization is  \begin{equation}\label{eq:sens}  \Delta I_m = {\frac{1}{\eta_s }}{\frac{SEFD}{\sqrt{2 \Delta \nu \tau_{acc}}}}   \end{equation}  in units of Janskys per synthesized beam area.   with $\eta_s$ most important factor being correlator efficiency $\eta_c = \frac{\text{correlator sensitivity}}{\text{sesitivity of a perfect analog correlator having the same } \tau_{acc}}$ (see \cite{sensitivity}).  \subsubsection{Minimize SEFD}  \subsubsection{Minimize System Temperature}  It is often instructive to express the system temperature in terms of the System Equivalent Flux Density, $SEFD$, defined as the flux density of a source that would deliver the same amount of power (see \cite{sensitivity2}):   \begin{equation}\label{eq:system_equivalent_flux_density}  SEFD = {\frac{T_{sys}}{\frac{\eta_a A}{2k_B}}}  \end{equation}  where $T_{sys}$ is the system temperature including contributions from receiver noise, feed losses, spillover, atmospheric emission, galactic background and cosmic background, $k_B = 1.380 \times 10^{-23}$ Joule $K^{-1}$ is the Boltzmann constant, $A$ is the antenna collecting area (thus we could also write $\pi \cdot D^2$), and $\eta_a$ is the antenna efficiency with $\eta_a = \eta_{\text{surface efficiency}} \cdot \eta_{\text{aperture blockage}} \cdot \eta_{\text{feed spillover efficiency}} \cdot \eta_{\text{illumination taper efficiency}}$ (see \cite{antenna})  \subsection{Minimize Operations Costs}  The operations cost is a complex problem divided in the sub-problems in this section.  \subsubsection{Maximize components reliability} 
...