\documentclass[10pt]{article}

\usepackage{fullpage}
\usepackage{setspace}
\usepackage{parskip}
\usepackage{titlesec}
\usepackage[section]{placeins}
\usepackage{xcolor}
\usepackage{breakcites}
\usepackage{lineno}
\usepackage{hyphenat}





\PassOptionsToPackage{hyphens}{url}
\usepackage[colorlinks = true,
            linkcolor = blue,
            urlcolor  = blue,
            citecolor = blue,
            anchorcolor = blue]{hyperref}
\usepackage{etoolbox}
\makeatletter
\patchcmd\@combinedblfloats{\box\@outputbox}{\unvbox\@outputbox}{}{%
  \errmessage{\noexpand\@combinedblfloats could not be patched}%
}%
\makeatother


\usepackage{natbib}




\renewenvironment{abstract}
  {{\bfseries\noindent{\abstractname}\par\nobreak}\footnotesize}
  {\bigskip}

\titlespacing{\section}{0pt}{*3}{*1}
\titlespacing{\subsection}{0pt}{*2}{*0.5}
\titlespacing{\subsubsection}{0pt}{*1.5}{0pt}


\usepackage{authblk}


\usepackage{graphicx}
\usepackage[space]{grffile}
\usepackage{latexsym}
\usepackage{textcomp}
\usepackage{longtable}
\usepackage{tabulary}
\usepackage{booktabs,array,multirow}
\usepackage{amsfonts,amsmath,amssymb}
\providecommand\citet{\cite}
\providecommand\citep{\cite}
\providecommand\citealt{\cite}
% You can conditionalize code for latexml or normal latex using this.
\newif\iflatexml\latexmlfalse
\providecommand{\tightlist}{\setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}%

\AtBeginDocument{\DeclareGraphicsExtensions{.pdf,.PDF,.eps,.EPS,.png,.PNG,.tif,.TIF,.jpg,.JPG,.jpeg,.JPEG}}

\usepackage[utf8]{inputenc}
\usepackage[english]{babel}



\usepackage{float}








\begin{document}

\title{Multi-Conductor Electromagnetic Coupling Model for Sensitive Wires
Subject to Driven Wire in Complex Electronic Systems}



\author[1]{Duo-Long Wu}%
\author[1]{Fan Jiang}%
\author[1]{Lulu Chen}%
\author[2]{Bing Xue}%
\author[1]{Xinxin Tian}%
\author[1]{Liang Hua Ye}%
\author[1]{Jian-Feng Li}%
\affil[1]{Guangdong University of Technology School of Physics and Optoelectronic Engineering}%
\affil[2]{Aalto University}%


\vspace{-1em}



  
  \date{May 24, 2024}


\begingroup
\let\center\flushleft
\let\endcenter\endflushleft
\maketitle
\endgroup





\selectlanguage{english}
\begin{abstract}
A novel multi-conductor electromagnetic coupling model for the
sensitive-wire subject to driven wire in a high-precision machining
workbench is proposed in this paper. The general coupling model for an
\emph{N-}wire system is derived and is used to evaluate the wire
coupling effect. Furthermore, 4-wire and 3-wire models are demonstrated
to verify the accuracy through full-wave electromagnetic simulation
below 10 MHz. The results show that the error between the proposed
method and the full-wave electromagnetic simulation is less than 10\%,
demonstrating the high efficiency and accuracy of the proposed method.
When the parameters of the driven power wire and the most sensitive wire
are fixed and the parameters of neighboring wires are swept, the maximum
fluctuation of the induced current on the most sensitive wire is 6.1 dB.
The efficient calculation method proposed in this work helps reduce the
risk of electromagnetic interference in complex electronic systems and
improves the design efficiency of wires. It is promising to become a
high-performance method with high efficiency and precision.%
\end{abstract}%



\sloppy


\textbf{Hosted file}

\verb`Wires Electromagnetic Coupling Model -10.18.docx`  available at \url{https://authorea.com/users/674812/articles/672996-multi-conductor-electromagnetic-coupling-model-for-sensitive-wires-subject-to-driven-wire-in-complex-electronic-systems}

\selectlanguage{english}
\FloatBarrier
\end{document}

