loading page

The effect of Rotor Separation on the Performance of a Dual Rotor Wind Turbine
  • Omar Mohammed,
  • Krishpersad Manohar
The University of the West Indies at Saint Augustine Faculty of Engineering

Corresponding Author:[email protected]

Author Profile
Omar Mohammed
The University of the West Indies at St Augustine
Author Profile
Krishpersad Manohar
The University of the West Indies St Augustine Campus
Author Profile


This study conducted simulation and experimental analysis on a dual rotor horizontal axis wind turbine to determine the effect of rotor separation on its performance. An air study was conducted to optimize the turbine blades to a local climate of Trinidad, it was determined that a NACA 64-315 air foil would be the most optimum for the conditions. QBlade software was used for the simulation, the power flow performance for multiple iterations of wind speed was found for the design. The effect of rotor separation on the performance of the dual rotor wind turbine was studied with rotor separation 0.25 m to 3.0 m at an interval of 0.25 m and it was discovered that the smallest rotor separation 0.25 m shows the largest tip speed ratio, while the largest rotor separation distance 3m has the smallest tip speed ratio at a fan speed of 1m/s. Also, as the rotor separation decreases the power coefficient (C P ) and the total power increase, which resulted to high energy output of the DRHAWT. This result is valid for the QBlade simulations and the experimental results.