loading page

Hydrogen Production from water splitting using Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) membrane coated with BaCe0.2Fe0.8O3-δ
  • Nasirudeen Ogunlakin,
  • Khaled Mezghani
Nasirudeen Ogunlakin
King Fahd University of Petroleum and Minerals Mechanical Engineering Department

Corresponding Author:[email protected]

Author Profile
Khaled Mezghani
King Fahd University of Petroleum & Minerals
Author Profile


Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) membrane can be very effective in hydrogen production from high-temperature water splitting by the in-situ permeation of oxygen through the membrane. However, the BSCF membrane cannot initiate the water splitting reaction at moderate temperature (750-950oC); hence a catalyst is required. Herein, we have developed and evaluated a new BaCexFe1-xO3-δ catalyst. The concentration of cerium was varied to determine its effect on the cubic structure. XRD results confirmed the cubic structure was maintained up to 20 mol% of cerium. The BaCe0.2Fe0.8O3-δ powder was coated as a catalyst on the BSCF membrane and evaluated for hydrogen production in a water-splitting membrane reactor. The obtained results revealed that hydrogen production rate increases with increasing temperature, methane concentration in the sweep gas, and water concentration in the feed gas. The highest hydrogen production rate (0.38μmol/cm2s) was obtained at 925oC using 15% CH4 in the sweep and 55% H2O in the feed.