loading page

Utilization of constructed wetland post harvested biomass through fly ash bricks plant: A phytoremediation approach
  • Mahesh Barya,
  • Amit Kumar,
  • Tarun Thakur
Mahesh Barya
Indira Gandhi National Tribal University

Corresponding Author:[email protected]

Author Profile
Amit Kumar
Nanjing University of Information Science and Technology
Author Profile
Tarun Thakur
Indira Gandhi National Tribal University
Author Profile


Toxic metal-contaminated wastewater is a major environmental issue that requires a practical and cost-effective technological solution. Heavy metal phytoremediation by constructed wetland is becoming more common around the world. Plants are used in phytoremediation to degrade, stabilize, and remove contaminants from soils, water, and waste. The key issues with managing heavy metal phytoremediation plants in an environmentally appropriate manner. The design of CWs for successful phytoremediation in heavy metals contaminated wastewater should not affect the local environment. By-product generation is another crucial part of phytoremediation’s success. Phyto-management has emerged as an alternative strategy in recent years. Phytoremediating plants ( C. indica and A. calamus) biomass has been successfully used in the manufacture of 70 fly-ash bricks. High rate of Cu (96 %), Zn (95 %), (Fe 93), and Cr (91 %) removal from Canna indica and Acorus calamus were found in the present study as compared to the Typha latifoliya, Myriophylhum aquaticum, Ludwigina palustris, Eichhornia crassipes, Schoenoplectus californicus, Cyperus papyrus, and Phragmites australis which indicates C. indica is the high potential for heavy metal removal and can be strongly used for industrial wastewater. In the way, the use of ornamental plants for phytoremediation of contaminated sewage wastewater would also change the landscape of the aquatic environment. This article summarises viable avenues in the method of using phytoremediating plant biomass for environmental protection.
23 Nov 2021Submitted to Ecohydrology
23 Nov 2021Submission Checks Completed
23 Nov 2021Assigned to Editor
30 Nov 2021Review(s) Completed, Editorial Evaluation Pending
30 Nov 2021Reviewer(s) Assigned
22 Dec 2021Editorial Decision: Revise Minor
23 Dec 20211st Revision Received
08 Jan 2022Submission Checks Completed
08 Jan 2022Assigned to Editor
08 Jan 2022Review(s) Completed, Editorial Evaluation Pending
23 Mar 2022Reviewer(s) Assigned
08 Apr 2022Editorial Decision: Accept