loading page

Investigating Storm-Driven Thermospheric Density Enhancements with Two-Line Element Sets and Orbital Propagation
  • Daniel Brandt,
  • Charles Bussy-Virat,
  • Aaron Ridley
Daniel Brandt
University of Michigan Ann Arbor

Corresponding Author:[email protected]

Author Profile
Charles Bussy-Virat
University of Michigan Ann Arbor
Author Profile
Aaron Ridley
University of Michigan Ann Arbor
Author Profile

Abstract

While flagship missions such as CHAMP and GOCE have shown us with accelerometer measurements that the thermospheric density in Low Earth Orbit (LEO) can increase by more than 200% during enhanced geomagnetic activity, current empirical models, such as those of the MSISE and Jacchia families, as well as the Drag Temperature Model, fail to reproduce this behavior, limiting the ability to perform orbit prediction and space situational awareness. Several methods have been employed to address this dilemma. One is the High-Accuracy Satellite Drag Model (HASDM), which uses its Dynamic Calibration Atmosphere to employ differential correction across 75 spherical calibration satellites to generate correction parameters to the density that are related to 10.7 cm solar radio flux and ap (Storz et al. 2005). Doornbos et al. 2008 has implemented a method that estimates height-dependent scale factors to the densities from empirical models with respect to densities directly derived from two- line element sets (TLEs). HASDM’s reliance on Space Surveillance Network observations limit its accessibility and detail, and Doornbos’ methods are limited by the fact that TLEs are mean elements; densities derived from them are subject to errors due to smoothing over an entire orbit. In addition, the method of deriving densities from TLEs was initially done only to provide inputs to the SGP4 orbital propagator, which was initially developed without consideration of solar radiation pressure on the trajectory of modeled spacecraft. We present a method to generate new model densities during geomagnetic storms by using an in-house orbital propagator, the Spacecraft Orbital Characterization Kit (SpOCK). This method estimates and applies scale factors to F10.7 and a p to minimize orbit propagation errors with TLEs. The method is tested on a variety of satellites, including CHAMP, GOCE, and the CubeSats of the QB50 and FLOCK constellations. This method proposes to grant insight into storm-time thermospheric density enhancement by modeling the effects of storms on the drag of numerous LEO spacecraft, increasing our understanding of thermospheric dynamics and granting us improved tools for space traffic management and thermospheric research.